Optimal for belt cleaning:
VSR VIBREX ®
Conveyor belt scrapers
for keeping conveyor belt systems clean
Conveyor belt scrapers
The right scraper for every application:
Spring Blade Cleaner
Spring Blade Cleaner Fix
Main scraper with rubber-cushioned spring blades that are bolted to aluminium clamps, and 100 mm wide hard metal strips; especially well-suited for installation situations with spatial restrictions and for reversing belts. The clamps are attached to an aluminium profile axis and can be individually removed and re-mounted with a screwdriver without removing the axis. The scraper is reinforced with a bracket for belt widths of 1200 mm and up.
Application
| Material properties: | adhesive / wet / damp dry / granulate / powdery |
| Examples: | sand, gravel, chalk, gypsum, crushed stone, broken glass |
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Reversing operation: suitable
- Belt surface: conditionally suitable for mechanical splices
Downloads
Spring Blade Cleaner Type Clip
Main scraper bolted on with aluminium clamps, rubber-cushioned spring blades and 100 mm wide hard metal strips; especially well-suited for installation situations with spatial restrictions and for reversing belts. The clamps are attached to an aluminium profile axis and can be individually removed and re-mounted with a screwdriver without removing the axis. The scraper is reinforced with a bracket for belt widths of 1200 mm and up.
Application
| Material properties: | adhesive / wet / damp / dry granulate / powdery / abrasive |
| Examples: | sand, gravel, chalk, gypsum, crushed stone, broken glass |
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Reversing operation: suitable
- Belt surface: conditionally suitable for mechanical splices
Downloads
Front Scrapers
Front Scraper Clip
Preliminary scraper with horizontally divided 100 mm wide PUR front blades for pre-cleaning of heavily soiled belts. Preferably used in combination with main or spring blade scrapers for higher demands regarding belt cleanliness.
The individual elastic preliminary blades are secured with aluminium clips on an aluminium profile axis and protected with an end-to-end rod. In case of wear, upper wear parts can be replaced with continued use of the supporting element. The scraper is reinforced with a bracket and equipped with an additional hole circle tension device for belt widths of 1200 mm and up.
Application
Material properties: adhesive / wet / moist
Examples: lime, chalk, sludge
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Drum diameter: 160 mm to 630 mm
- Spherical drums: conditionally suitable
- Operating temperature: -30°C to 80°C
- Reversing operation: conditionally suitable (installation on both ends)
- Belt surface: Mechanical splices and belt surface damage should be avoided.
Downloads
Front Scraper Praktik
Preliminary scraper with one-piece 100 mm wide PUR front blades for pre-cleaning of heavily soiled belts. Preferably used in combination with main or spring blade scrapers for higher demands regarding belt cleanliness.
The individual elastic preliminary blades are bolted onto the end-to-end profile of a saddle axis. The scraper is reinforced with a bracket and equipped with an additional hole circle tension device for belt widths of 1200 mm and up.
Application
Material properties: adhesive / wet / moist
Examples: lime, chalk, sludge
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Drum diameter: 160 mm to 630 mm
- Spherical drums: conditionally suitable
- Operating temperature: -30°C to +80°C
- Reversing operation: conditionally suitable (installation on both ends)
- Belt surface: mechanical splices and belt surface damage should be avoided.
Downloads
Belt inside Scrapers
Diagonal Scraper
Inside belt scraper applied under the force of its own weight with obliquely arranged three-layer rubber strip and low spatial requirement, floating bearing.
Application
Material properties: wet / moist / dry
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Reversing operation: not suitable
- Belt surface: conditionally suitable for mechanical splices
Downloads
Plough Scraper
Inside belt scraper applied under the force of its own weight with V-shaped three-layer rubber strip, floating bearing.
Application
Material properties: wet / moist / dry
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Reversing operation: not suitable
- Belt surface: conditionally suitable for mechanical splices
Downloads
Belt Cleaning Brush
VIBREX Belt Cleaning Brush
Lamella-type brush with internal drum motor for belts with uneven surfaces (damage, low fins)
Application
Material properties: adhesive / wet / moist
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Belt surface: conditionally suitable with mechanical splices and belt surface damage
Downloads
Main Scraper
Main Scraper Clip
Spring-arm scraper mounted with stainless steel clamps, rubber-cushioned spring arm and 125 mm wide fin-type overlapping hard metal blades. The clamps are attached to an aluminium profile axis and can be individually removed and re-mounted with a screwdriver without removing the axis. The scraper is reinforced with a bracket and equipped with an additional hole circle tension device for belt widths of 1200 mm and up.
Application
Material properties: adhesive / wet / moist / dry
Examples: sand, gravel, crushed stone, broken glass, asphalt, coal
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Reversing operation: not suitable
- Belt surface: conditionally suitable for mechanical splices
This scraper is available in a special version for the asphalt industry, without plastic components at the scraper blade.
Downloads
Main Scraper Praktik
Spring-arm scraper mounted on the axis, rubber-cushioned spring arm and 125 mm wide fin-type overlapping hard metal blades. The scraper is reinforced with a bracket and equipped with an additional hole circle tension device for belt widths of 1200 mm and up.
Application
Material properties: adhesive / wet / moist / dry
Examples: sand, gravel, crushed stone, broken glass, asphalt, coal
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Operating temperature: -30°C to +80°C
- Reversing operation: not suitable
- Belt surface: conditionally suitable for mechanical splices
Downloads
Head Scraper
Head Cleaner VXK 100K
Head scraper with rubber-cushioned spring arm fixed on the axis and 100 mm wide hard metal blades. The elements are individually bolted onto the continuous web of a profile axis. The scraper is reinforced with a bracket and equipped with an additional hole circle tension device for belt widths of 1200 mm and up.
Application
Material properties: adhesive / wet / moist / dry / granulate
Examples: sand, gravel, stone, crushed stone, coal
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Drum diameter: 160 mm to 500 mm*
- Spherical drums: not suitable
- Operating temperature: -30°C to +80°C
- Reversing operation: conditionally suitable (installation on both ends)
- Belt surface: no mechanical splices
*head scraper VXK 100L should be used with drum diameter of 400 mm and up, and must be used with diameters of 600 mm and up.
Downloads
Head Cleaner VXX 100K
Head scraper with spring arm fixed on the axis and 100 mm wide hard metal blades. Each element contains an individual steel spring so that the scraper can also be used at higher temperatures. The elements are individually bolted onto the continuous web of a profile axis. The scraper is reinforced with a bracket and equipped with an additional hole circle tension device for belt widths of 1200 mm and up.
Application
Material properties: adhesive / wet / moist / dry / granulate
Examples: sand, gravel, stone, crushed stone, coal
Specifications
- Belt width: 400 mm to 2000 mm
- Belt speed: max. 2.5 m/s
- Drum diameter: 160 mm to 500 mm*
- Spherical drums: not suitable
- Operating temperature: -30°C to +200°C
- Reversing operation: conditionally suitable (installation on both ends)
- Belt surface: no mechanical splices
*head scraper VXX 100L should be used with drum diameter of 400 mm and up, and must be used with diameters of 600 mm and up.
Downloads
